Casting Machines

Digitlal Vulcanizer Die Press

This is a table top model vulcanizer with pre-drilled holes for easy mounting. It is ideal to eliminate unevenly vucanized molds with aluminium heating plates. It has On/Off Power Button and Thermostat Pilor Light with Automatic Temperature Controller (Optional) and One Hour Timer. It has large wheel for maximum leverage, large bars to prevent top plate from moving. Available in both Analog and Digital models.

 

Vulcanizer Die Press

This is a table top model vulcanizer with pre-drilled holes for easy mounting. It is ideal to eliminate unevenly vucanized molds with aluminium heating plates. It has On/Off Power Button and Thermostat Pilor Light with Automatic Temperature Controller (Optional) and One Hour Timer. It has large wheel for maximum leverage, large bars to prevent top plate from moving. Available in both Analog and Digital models.

Wax Injector Economy Model

Our firm offers its clients with a comprehensive range of Wax Injector Machine (1 Kg) that is used for making complex wax models and very thin wax as well. To ensure a steady pressure at every injection, the wax is injected using rubber moulds with the assistance of auto clamps. This machine has a system that needs to be manually operated.

 

Digital Wax Injector

This is a heavy duty  wax injector equipped with Digital  Double  display temp. alluminium wax pot ensure uniform heating. 220-240 volts, 500 watts.

                        

Steam Dewaxer

Steam Dewaxer is very useful to improve results in lost wax casting process. In this system, Steam and Heat removes Wax from Invested Flasks before puting them into Burnout Furnace. The removed Wax turns into liquid form so this sytem not create any kind of fumes. It also reduces problems of furme and smoke during burnout process.

                                                 

Burnout Furnace

This is an Expensive, Heavy duty and Maintenance free furnace with high quality elements deeply to avoid damage by tongs. These holes of ½'' diameter are provided on top and door to help escape of flames. stand-by element is provided in case any one element is fused. Elements are easily replaceable. A thermocouple is fitted to determine accurate temperature of furnace. Burnout furnaces are available in different sizes as per requirements.

 

Water Jet

Water Jet Machine by high pressure water blasting, quickly and efficiently remove the Investment Powder from Casting Tree without any damage to the surface. It has an internally lit work chamber with hinged two windows to place the flasks easily near the pump for cleaning. The whole working area is made of Stainless Steel and the Motor Housing is powder coated. We provide long lasting and heavy duty Rubber Gloves with Water Jet.

    

Manual Pouring Vacuum Casting Machine Economy

We are one of the leading organizations engaged in providing excellent quality Jewellery Vacuum Casting Machines, which are manufactured by using highly grade material. These Jewellery Vacuum Casting Machines are widely appreciated by our clients who are situated all round the nation. High in demand, these Jewellery Vacuum Casting Machines are available at most reasonable prices.

Manual Pouring Vacuum Casting Machine Premium

We bring forth Vacuum Casting Machine, made using genuine grade raw material, sourced from trusted vendors of the market. Our product has duo tanks, owing to which high vacuum pressures are generated. The metal melting furnace of our products is shock proof and equipped with digital temperature controller. Our product performs in an easy manner and thus, can be managed without any hurdle. These machines are amalgamation of following features:

  •   14” investment tank 81/2” deep
  •   4’’ casting tank 8’’ deep
  •   1 Kg gold melter for gold melting
  •   250 litre vacuum pump with 5.5 litre oil capacity 780 R.P.M
  •   Transparent acrylic 14’’ dia. Dom 13/4’’ thick on investment       chamber
  •   Total body/housing is manufactured by 304 SS. material
  •   Total weight of machine is 130 kg. approx
  •   Two tank system to generate high vacuum pressure for       minimum porosity casting
  •   Excellent dense casting is provided and is comparable with any       foreign make m/c
  •   Casting chamber with flask size 2" to 5" dia. Wide/up to 9"       height capacity
  •   100% shock proof metal melting furnace with digital temp.        control

 

Solid Wall Casting Flasks

Solid Wall Casting Flasks produced from 14 SWG stainless steel corrosion. It has High Heat Wall andMachined Ends which offer better performance and durability. We manufacture and supply these flasks in many different sizes.

 

Perforated Casting Flasks with Flange

We offer wide range of Flasks which are offered in different sizes and shapes. We design and develop them with customized changes based on the order quantity of our clients.

 

Sprue Base
We are an eminent Rubber Sprue Base Manufacturer and Supplier in national markets. The Rubber Sprue Base offered by us is made from natural rubber material ensuring high strength and durability.

 

Silicon Gasket

We manufacture and export a supreme quality range of Silicon Gaskets, which are available indifferent colors, sizes as well as hardness.These products are highly acclaimed for theireasy maintenance and we manufacture these products using high grade raw materials obtained from the reliable vendors. Our products are widely used for outdoor purposesand we offer these products in a cost effective manner. Thus, these products are available as per the given information by our valuable clients. 

 

Rubber Bowls for Investment Mixing

Being a quality oriented organization; we manufacture and export a premium quality range of Rubber Bowls for Investment Mixing,these products are available as per theinternational quality standards and we manufacture these products using advanced technologies. Our products are used for mixing purposes and we offer these products at most competitive prices to our respected clients. These products are having various quality characteristics as well as are available invarious specifications.

 

Bell Jar

Manufactured of High Impact Plastic, our Bell Jar is useful to put on Vacuum Table while vacuuming the investment in Vacuum Casting Machine.

Mold Frames

We manufacture quality aluminium frames for your all need. T series aluminium frames can fulfil customers' needs and are welded for great mesh adhesion. All corners are completely sealed to prevent ink from leaking. One side is specially prepared to make fabric adhesion fast and easy. Optional corner reinforcement is available for any frame size. Larger aluminium extrusions help eliminate frame distortion. Surfaces are anodized for maximum strength and durability.

Mold Plates

These sturdy metal plates are useful in process of vulcanizing of Uncured Rubber. It can be placed upon Mold Frames while vulcanizing uncured rubber. It is available in different sizes and in set of two.

Mold Cutting Blades

These Surgical Blades are used for cutting Rubber Molds. There are 3 different types of these blades are available. These blades are usually packed in a box containing 100 separately wrapped blades.

 

Wax Tool Set

Set of 10 wax tools in the most popular shapes. Great for carving wax models. Each tool is double ended with different shapes on each end. Set is furnished without stand. Economically priced. Average length is 6 1/2"

Brass Sprue Former

We are specialized in manufacturing a high quality range of Brass Sprue Formers, which are available in various specifications in terms of shapes, sizes and designs and these products are manufactured according to the global quality standards. Our products are available with excellent finishes and are widely known for their easy installation. Further, these products are available at very affordable pricesto our clients . 

 

Premium Digital Electric Gold Melting Furnace

These Furnaces are specially made for gold smith & silver smith to melt gold & silver without any according to metal. Facility of setting temperature is provided by which you can set the required temperature according to metal and alloys. Automatic temperature control Prevents the burning or loss of metal and alloys the thermostat control and display facilitate to operate with ease and comfortable.

 

Digital Electric Gold Melting Furnace

This is very economical unit widely used for melting Gold, Silver and Other Nonferrous Alloys for Casting, Ingot or Shot Making. It features a Digital Temperature Controller which maintain a preset pouring temperature. Graphite Crucible of 1 Kg., 2 Kg. and 5 Kg. capacity to be placed in melting chamber. We supply this furnace with 1 Carbon Stick for Pouring the metal, a Special Tong to remove crucible from melting chamber and one crucible.

Digital Electric Melting Furnace (Two Piece Model)
This is very economical unit widely used for melting Gold, Silver and Other Nonferrous Alloys for Casting, Ingot or Shot Making. It features a Digital Temperature Controller which maintain a preset pouring temperature. Graphite Crucible of 1 Kg., 2 Kg. and 5 Kg. capacity to be placed in melting chamber. We supply this furnace with 1 Carbon Stick for Pouring the metal, a Special Tong to remove crucible from melting chamber and one crucible.

 

Induction Melting Furnace

With thorough industrial knowledge, we manufacture, supply and export a wide assortment of Induction Melting Furnace. These products are widely demanded by the clients for their precise use. The offered products are known for bearing heavy temperature and able to melt the metal accurately. Our products are highly praised by the clients for their availability in various specifications.

 

Features:

  •  Innovative design
  •  Optimal productivity     
  •  Top quality and long life

 

Air & Gas Powered Gold Melting Furnace - Table Model

This is melting furnace & it uses LPG Gas as fuel. Motorised air blower is provided. Available in 2 sizes: 3 Kgs & 5 Kgs Gold/Silver melting capacity

 

Air & Gas Powered Gold Melting Furnace - Floor Model

We are presenting a wide array of Gas Powered Gold Melting Furnace to our prestigious clients. These products are widely demanded by the clients for their precision and durability. The offered products are available in different sizes and specifications. Our products are suitable to melt gold using gas. Moreover, our products are known for their corrosion resistant and temperature resistant nature.

Features:

  •  Low power
  •  Easy to install
  •  Noiseless performance

 

Graphite Replacement Crucibles with Collar

Graphite Crucibles are mainly used in Melting Furnace. These quality crucilbes comes with the best finishing and hold the metal well at very high temperature in the melting chamber. Available in various sizes to suit the Melting Capacity of the Furnace.

 

Graphite Replacement Crucibles without Collar

We are one of the leading manufacturers and exporters of Graphite Replacement Crucibles without Collar, which are used jewellery making and dentistry casting. These products are manufactured using ultra fine graphite and are available in different dimensions as well as specifications. Our products are widely known for their resistant to temperature and these products are available at reasonable prices.These are able to provide dimension control as well as smooth finishes. 

 

Adjustable Ingot Mold
Recycle your scrap metal into ingot sheets for rolling and shaping. Adjust the size of the ingot by moving to the desired size and clamping the two horizontal plates with the screw on the handle.

 

Casting Crucible

With in depth expertise, we manufacture and export a competitive range of Centrifugal Furnace Crucible, which are used in different industries such as jewellery making, diamondand many others. These products are fabricated using modern machines using hi-tech infrastructure facilities. Our products are widely known for their excellent finishes as well as we offer these products at lesser prices. These products are available as per theindustrial standards and we offer these products with various salient features that are: 

  •  Smooth finishes
  •  Long lasting
  •  Easy to use

 

Graphite Stirring Rods

We manufacture and export an excellent quality range of Graphite Stirring Rods, which are used in the casting machines. These products are also used in the diamond cutting machinesand we offer these products in a cost effective manner. Our products are available in different sizes as well as shapes and these products are widely known for their high stability. Thus, we offer these products within stimulated time frame and these products are having various quality characteristics such as: 

 Corrosion-resistance
 Strong anti-oxidation
 Low electric resistance

 

Open Ingot Mold

We manufacture and supply Ingot Molds. The following are differen variants we offer to customers:

  Open Ingot Molds
 Ingot Molds- One side Wire and Assorted Patterns on opposite side
  Two Side Wire Ingot Molds
 Single Side Ingot Molds

 

Reversible Ingot Mold
Recycles Scrap Metal into Sheet & Wire 
• Includes C-Clamp to Secure Ingot 

 

Needle Files

Premium-quality Grobet files are recognized for their long service life and used by jewellers all over the world. This set includes:
• Three-square file
• Square file
• Round file
• Slitting file
• Knife file
• Marking file
• Half-round file
• Equalling file
.Crossing file
• Barrette file
• Warding file
• Joint round-edge
Even you can order additional cuts and shapes or individual Grobet files. 3-1/4" (83mm) cutting surface.

 

Gold Melting Induction Furnace

This is called gold melting induction furnace. It is easy to install & operate. It is used as a domestic single phase 220 v. Ensures rapid melting & Eliminates burning loss of metal due to oxidation unlike in conventional coil type furnaces. And Perfect mixing of alloys due to automatic stirring. Fully automatic controls and low power consumption and loss.

 

Gold Melting Furnace

Our organization instrumental in providing fine quality Gold Melting Induction Furnaces to our valuable clients. Manufactured by using advance technology and high grade material, these Gold Melting Induction Furnaces are widely appreciated by our clients. Highlights: - Operates on single phase , Fastest melting , Easy to install , No metal loss , Minimum power consumption, Zero tolerance safety precautions, Automatic power & temperature control, Perfect homogeneous mixing of alloy, Best suitable for retail channel stores. Benefits: - 80% income tax depreciable.Minimum space and power requirements. No product of combustion or waste. Economical and efficient in operation.Easy and safe operation. Energy saving-flame less furnace. Non-stop operation as chill unit is included equipment. Clients can avail from us these Gold Melting Induction Furnace at most affordable prices.

 

Carving Wax

These File-A-Wax kits are convenient and ready to use for a multitude of jewellery pieces and designs. All three hardness grades can be shaped, filed or carved. Experienced jewellers worldwide prefer to keep a selection of different shapes on hand. This affords them the ability to respond quickly to design assignments or use for their own creative inspirations.

 

Casting Rubbers

Jewellery Moulding Rubber has been the industry standard for more than 40 years and continues to be the best jewellery moulding rubber available for lost wax jewellery casting. The less expensive and firmer of our two grades, has a high concentration of pure natural gum rubber, which makes it resilient and pliable, qualities that the experienced mould-maker values in his efforts to produce high-quality moulds in the shortest reasonable time.

 

Casting Powder

This investment powder is applicable to casting platinum, palladium jewelleries. The investment powder is applicable to fine parts precision casting. Forms a strong, tough mould, prevents cracking and deformation. Its Satin smooth mould inner surface. It’s easy to pattern drawing, divesting and clean deflasking. It also delivers a satin smooth surface finish, sharp details.

 

Soldering Powder

We are one of the leading importers and exporters of unmatched range of Solder Powders. These are procured from certified vendors and extensively used in the jewellery industry. Our range is available in various specifications that meet the individual requirement of our clients. Furthermore, we provide quality packaging of products that ensures safe delivery.

Specifications:

Type

Description

B

For soldering silver chains and 8-9-10ct

B1

For soldering 14-18-22ct gold chains

B1/22

For soldering 22ct gold chains

B1/24

For soldering 24ct gold chains

B1AG

Used for soldering gold chains of any fineness intended to withstand strong mechanical strains

B1AGS

Particularly suitable for soldering hollow chains with iron or copper cores

B2

For soldering brass chains

B/Pt

For soldering platinum chains

 

 

Aluminium Frames

We manufacture quality aluminium frames for your all need. T series aluminium frames can fulfil customers' needs and are welded for great mesh adhesion. All corners are completely sealed to prevent ink from leaking. One side is specially prepared to make fabric adhesion fast and easy. Optional corner reinforcement is available for any frame size. Larger aluminium extrusions help eliminate frame distortion. Surfaces are anodized for maximum strength and durability.

 

Stand For Minicraft

We bring forth for our clients superior quality Mini Craft Drill. These Mini Craft Drills are made from high quality of raw material which ensures durability at its user end. These jewellery machines are good demand in the market. Our clients can avail from us these products at most competitive rates.

 

Grooving Plier

The Flat Nose Pliers designed for making sharp bends and right angles in soft wire. Flat Nose Pliers Craft Tool grip flat objects and work well for straightening bent wire. Box-joint construction for dependable use and smooth operation. Double spring to help lessen hand fatigue. Suitable tool for craftsman and jewellers. Soft rubber grip is easy for gripping.

 

Semi Automatic Chain Machine

Semi automatic machine for making (CURB, CABLE, and DOUBLE CURB MACHINE) with wire from 0.25mm to 1.00mm of diameter, speed 80/110 links/minutes.

 

End Caps Die & Round Die

We are the leading manufacturer and exporter of End Cap Round Die. These products are manufactured with superior quality raw material and these raw materials are purchased from the reliable vendors in the market in order to keep the customer satisfaction in mind. We also provide customize solution as per the customer requirement.
The features of End Cap Round Die are:-

  •  Durable
  •  Quality product
  •  Requires less maintenance
  •  Affordable rates

 

Vaccum Casting Plant

We are one of the leading organizations engaged in providing excellent quality Jewellery Vacuum Casting Machines, which are manufactured by using highly grade material. These Jewellery Vacuum Casting Machines are widely appreciated by our clients who are situated all round the nation. High in demand, these Jewellery Vacuum Casting Machines are available at most reasonable prices.

 

Graphite Crucible

The graphite crucibles for smelting of precious metals (especially for jewellery smelting). We can produce the graphite crucibles according to per customers' special requests.

 

Hydro Max

We provide a wide range of Hydromax Micro Blazers for soldering applications, which produces a high-temperature flame without the need of fuel, gas or messy chemicals. This is powered by standard mains electrical power and works on electro-chemical splitting of water. These brazers need only water as a consumable and create an intense oxy-hydrogen flame. Our range of Hydromax Micro Blazers does not produce soot or any other combustion by product.

 

Gas Lamp
we are using a gas lamp for jewel equipment designs.

 

Hand Blower

We have an unrivalled reputation in the field of manufacturing, exporting, and supplying optimum quality Hand Blowers. Designed to precision, the Hand Blowers provided by us are widely used in different industries for varied purposes. Our Hand Blowers are made of aluminum die cast, with helical gear and finished with hammer tone color. The raw materials used in the production process are sourced from highly trusted vendors to maintain consistency in our quality. Our team of experts regularly inspects these Hand Blowers on various norms in order to meet set industrial norms.

 

Rava Cutter

Our organization is engaged in providing clients with a comprehensive gamut of Wire Cutter (Royal Rava Cutter)

 

Cutting Machine

We provide an extensive range of Cutting Machines, which is renowned for precise functioning and longer functional life. These products are easy to operate and can be easily carried to the work site and placed directly on the plate, owing to their light weight and small size. 

 

Fly Press

we are engaged in offering our clients Steel Body Fly Press Machine which are extensively used in varied industrial purposes for punching and bending works. it is extensively used in automobile, sheet metal, control panel board and kitchen equipment industry. it can be personalized according to client requirement

 

Hydraulic Press.1

The Hydraulic Presses offered by us are highly appreciated for their various qualitative features and wide application areas. Clients can avail these products in various models as per their requirements. We also offer these H Frame Hydraulic Press with customization facility to meet the varied demands of clients. The range is offered at pocket friendly prices.

 

Hydraulic Press.2

The Hydraulic Presses offered by us are highly appreciated for their various qualitative features and wide application areas. Clients can avail these products in various models as per their requirements. We also offer these H Frame Hydraulic Press with customization facility to meet the varied demands of clients. The range is offered at pocket friendly prices.

These products are used for the following operations:

  •  Punching
  •  Assembling
 Deep drawing

 

Four in one Zig-Zag M/C

Zig Zag Machine For Jewelers, Metalsmiths & Silversmiths. This is a new zig zag machine. Great for jewelers, metalsmiths and silversmiths. Makes a sheet of metal into a zig zag pattern. It measures approximately 8 3/4" (222.2 mm) long We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

 

Moulding Box

Our metal moulding boxes and foundry moulding boxes are manufactured as per the IS standards.

 

Ball Rolling Dies

Our Ball Rolling Dies are most commonly used for making numerous kinds of jewellery items. These are acknowledged in the market for providing optimality in finish of the article. Moreover, these machines have simple structures and are easy to use. Our machines can carve mesmerizing designs and patterns. These are available in bronze and brass metals.

 

Gas Gun

we are using a gas gun for jewel equipment designs.

 

Petrol Gun

Petrol Torches that we offer are developed and fabricated in our sufficiently supplied manufacturing facility. The material we procure is reliably sourced from recognized vendors. We use the latest techniques for designing these products in a client-specific manner. The torches we offer are provided with a regulator and switch system.

 

Rava Cutter Machine

Our organization is engaged in providing clients with a comprehensive gamut of Wire Cutter (Royal Rava Cutter). Our wire cutters normally work on manual basis and are manufactured using quality raw material sourced from reliable sources. These cutters are easy to use and are available in different specifications. 

 

Gravers

Traditionally, one of the most prized methods of dressing up an article was to have it hand engraved. Engraving is a skill which takes a long time to master as well as continued practice to maintain a high level of skill. 

 

Casting Wax

Dental technicians for the production of metal patterns palate floor with style. There are many products that pattern, the thickness of choice for users with a realistic pattern, small clean, transparent texture, soft and easy to paste, easy to operate, and other advantages 

 

Cable Drill (Foredom & Indian Make)

The MB150 hobby drill is a high quality, low-cost, lightweight, miniature drill ideal for use in electronics, PCB production, jewellery fabrication and model making.

  • Keyless chuck
  • Chuck capacity 0.4 to 3.2mm
  • Collet set MB1925 can be fitted
  • Ergonomic design includes a pencil grip for comfort
  • Motor is fan cooled for long periods of use and longevity
  • Overall length: 170mm

 

Mini craft Machine

we use a mini craft machine for jewel equipment designs.

 

Enamel Glass

we use enamel glass for jewel desings.

 

Ring Sticks/Ring Punch/Iron Plate

Ring Sticks/Ring Punch/Iron Plate

 

Master Alloys

Our master alloys are produced in adherence to strict quality control practices utilizing an induction melting and alloying process

 

Plating Solutions

There are many types of plating solutions that are used in both brush and tank plating.

 

Rouge Brushes & Buffs

Rouge Brushes & Buffs

 

Buffing Accessories
  • Buffing Wheel
  • Stitching Colour Buff
  • Wirfire Brush (Eagle & J k Brand)
  • Non woven wheel
  • Full Stitch Cloth Wheel